If you are looking for the best Hifonics speakers, it is because you know how useful good audio equipment is to listen to your favorite music while traveling by car. Fortunately, buying high-quality carcasses at a reasonable price today is much simpler than it was a few years ago.

However, choosing the right sound system is not always a simple task since it requires a minimum of technical knowledge. Also, it is important to be very clear on what type of equipment you want to install and what your expectations are.

Here we reviewed some of the best Hifonics amplifiers that are listed below.

RANK NO. 1
Hifonics BXX6000.1D 6000 Watt RMS 1-Channel Monoblock D Class Amplifier Brutus...
  • Hifonics Brutus BXX6000.1D 6000 Watt RMS 1-Channel Car Amplifier Mono
  • Power @ 1 Ohms: 6000 Watts | Power @ 2 Ohms: 3000 Watts| Power @ 4 Ohms: 1500 Watts
  • Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi output devices
  • 1 Mono channel operation mode with Bass Knob Control Included
  • Nickel-plated RCA jacks create the most efficient audio connection and resist corrosion
SaleRANK NO. 2
Hifonics BG-2200.1D Brutus Gamma 2200 Watt Mono Car Audio Amplifier Class D Amp
  • 2,200 watts max
  • 1,100 watts x 1 at 2 ohms
  • 550 watts x 1 at 4 ohms
  • Frequency response: 10 Hz to 500 Hz
  • Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
RANK NO. 3
Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio...
  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio...
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure...
  • EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier...
RANK NO. 4
Hifonics BXX1200.1D Brutus Class D 1200W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an...
  • The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during...
  • The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and...
  • Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan.
  • Dimensions: 9"W x 13.25"L x 2.5"H, 1-year Manufacturer's Warranty
RANK NO. 5
Hifonics ZXX-3200.1D Zeus Mono Channel Car Audio Amplifier (Silver) – Class D...
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built...
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old...
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High...
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the...
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the...
RANK NO. 7
Hifonics BXX4000.1D Brutus Class D 4000W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • 4000W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • Signal to Noise > 95dB
  • SUBSONIC FILTER: 15Hz - 35Hz
RANK NO. 8
Hifonics ZTH-1625.5D Zeus Theta Compact Five Channel Car Audio Amplifier...
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built...
  • BRIDGEABLE - Full range, five channel amplifier with flexible installation allows this amp to run in five channel or bridged mono...
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old...
  • CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and...
  • HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of...
RANK NO. 9
Hifonics BXX6000.1D 6000 Watt RMS 1-Channel Monoblock D Class Amplifier Brutus...
  • Hifonics Brutus BXX6000.1D 6000 Watt RMS 1-Channel Car Amplifier Mono
  • Power @ 1 Ohms: 6000 Watts | Power @ 2 Ohms: 3000 Watts| Power @ 4 Ohms: 1500 Watts
  • Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi output devices
  • 1 Mono channel operation mode with Bass Knob Control Included
  • Nickel-plated RCA jacks create the most efficient audio connection and resist corrosion
RANK NO. 10
Hifonics BXX3000.1D Brutus Class D 3000W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • 3000W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • Phase Shift: 0° - 180°
  • Signal to Noise - >95dB. Frequency Response - 10Hz - 250Hz. Bass Boost - 0dB - 10dB. Subsonic Filter - 15Hz - 35Hz

Buyer Guide to Choose Hifonics

When it comes to buying car speakers, it is essential to consider several significant problems. Currently, there is a wide range of speaker models of this type, so choosing the right ones is not always a simple task.

What Exactly Are Car Speakers?

Car speakers are electroacoustic transducers capable of transforming electrical energy into acoustic energy. In this way, they convert electrical signals into sound waves. In the case of car speakers, they are simply equipment specially designed for installation in the car.

Should I Replace the Car Speaker Source?

This question is quite complicated, especially nowadays, because multimedia equipment is integrated into the control consoles.

In general, the truth is that the sources of origin that are provided for each vehicle do not offer particularly good quality levels. Of course, there are some exceptions, such as the cases of audio packages sponsored by some brands.

In the latter case, the source itself can offer quite an acceptable sound quality. Therefore, if you want to enjoy a high-end speaker system, you have no choice but to change the source unless you decide to install cheaper speakers.

What Is the RMS Power of Car Speakers?

In general, when we talk about the power of the speakers, we can notice a difference between the maximum music output power and the nominal power or RMS (Root Mean Square, from its acronym in English).

The latter indicates the average power level or the maximum power that a speaker can withstand before it starts to distort the sound.

The maximum music output power is the maximum that the speaker can provide and dissipate in ideal conditions. It is calculated in time intervals of 10 milliseconds until it breaks.

Therefore, it is not real data and does not provide any relevant information. However, unfortunately, many manufacturers use it to promote their speakers.

Should I only Improve the Front Speakers of The Car?

If you want to enjoy the highest possible quality, you should invest all your budget in improving the speakers of the front of your vehicle and, of course, the amplification. If you are not very demanding and all you want is just a little more power, you can choose to improve the set of speakers for your vehicle.

What Care Car Speakers require?

Like any electronic device, car speakers require a lot of attention. To begin with, it is important to install them correctly and that the power supply is adequate to prevent them from being damaged.

On the other hand, it is convenient to carry out a series of maintenance operations, among which the need to clean them frequently is underlined.

You can clean them with a vacuum cleaner, ideally a portable one. To do this in the best way, it is necessary to place the vacuum cleaner in front of the case surface and remove all the dust, because if it gets a little stuck in the grid, it could interfere with the emission of sound. This way, with minimal care, your sound system will have a longer life.

Purchase Criteria

When buying car speakers, it is important to consider the number of purchase criteria. To help you in the selection process, we have selected the ones that we believe are the most important. In this way, you will have a practical purchase guide that will allow you to choose your car speakers with the best value for money.

  • Power
  • Impedance
  • Frequency range
  • Number of channels
  • Assembly and installation

Power

Power, measured in watts, indicates the ability of a device to generate sound. In the case of car speakers, power is distributed over several channels or ways.

Therefore, when looking at the specifications of the device you wish to purchase, it is important to check that the indicated power refers to the device in its entirety or each of the channels.

An average power range could be 30 W per channel, while a high power range could be 50 W per channel. In any case, you should not fall into the error of considering that more power means better sound quality. Power can affect sound quality, but that’s not the only aspect you need to consider.

Impedance

Impedance measures the opposition offered by a circuit to the passage of alternating current. Its value varies according to the frequency so that the speaker has as many values ​​as there are frequencies of use.

Therefore, the nominal value of the impedance offered by the manufacturers is usually referred to as a frequency of 1 kHz and is usually 4, 6, or 8 ohms.

When choosing speakers, it is important to opt for some impedance values ​​that conform to the minimum values ​​of the audio source or amplifier with which you intend to work.

In this way, the signal will come with more force. Keep in mind that the higher the impedance in ohms, the lower the speaker output power.

Frequency Range

The frequency range indicates the minimum and maximum frequencies that the speakers can support. In this regard, you should keep in mind that the human ear can only hear sound waves with frequencies between 18 or 20 Hz and 20 kHz.

For this reason, you will be interested in choosing a device whose frequency range is as close to these values ​​as possible.

Number of Channels

Through specially designed filters, a speaker can distribute the sound waves of low, high, and medium frequencies to different drivers. In this way, woofers are used for bass, medium drivers are used for mid frequencies, and tweeters are used for highs.

Nowadays, you can find two or three-way devices, or one way only. A car speaker that uses a driver for each frequency range is a three-way device. One-way devices, on the other hand, have only one speaker, while two-way devices usually consist of a woofer and a tweeter.

Assembly and Installation

Ultimately, this factor will largely depend on the vehicle model you own. If it is very old, you may be forced to make some changes. In short, the simpler the installation and assembly process, the better.

For this reason, you will certainly be interested in having both the wiring and the rest of the elements necessary for mounting the device.

Conclusions

The experience of enjoying your favorite music with high-quality car speakers during your road trips is one of those sensations that is hard to forget. Fortunately, at the moment, it is possible to buy car crates without necessarily having to invest a large sum of money.

However, choosing the right equipment is not always easy. To do this, it is important to take into account criteria such as power, impedance, sensitivity, as well as ease of installation and assembly.

Of course, the manufacturer’s brand should not be overlooked either. It is best to opt for a brand with extensive experience in developing car speakers.

Like this article? Share with your friends!

Read also:

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed