A demolition hammer is a powerful tool with which you can work on any wall. With this tool, you can drill and perform heavy tasks effortlessly. Depending on the model, we can do a variety of jobs. Don’t forget to choose according to the power and accessories you need.

If you need a powerful and functional tool, you’ve come to the right place. In this article, you will find the best demolition hammers on the market in comparison. In addition, to get all the information, we have added a detailed buying guide. With all this information in hand, you will not make a mistake buying.

Here we had listed out the best demolition hammers that are present below.

XtremepowerUS 2200Watt Heavy Duty Electric Demolition Jack hammer Concrete Breaker W/Case, Gloves
  • It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
  • Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
  • Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
  • It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
  • Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches
Makita HM0870C 11-Pound Demolition Hammer SDS-Max
  • Powerful 10 AMP motor delivers 8. 4 ft. lbs. of impact energy to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Easy-to-operate slide switch increases productivity and allows for continuous use
  • L. E. D. service light notifies the user approximately 8 hours before the brushes need to be replaced
TR Industrial TR89305 Electric Jack Hammer for Demolition, 60-Joules, ETL Listed
  • 60 joules (44.2 ft-lbs) of impact energy delivers powerful, maximum performance
  • 1800 BPM ultra fast demolition helps you get the job done faster
  • All-metal housing built for heavy-duty applications
  • 20-ft extra long UL listed power cord with double insulated plug, handles extreme-weather
  • ETL Listed, rigorously tested and certified to comply with UL safety standards
Heavy Duty Demolition Jack Hammer Concrete Breaker 1100w 15J
  • Ideal for demolition/concrete jobsite, crushing; chipping; digging and squaring. Grease packed gear box;
  • Voltage: 110 V/60 HZ; Input Power: 1100W;
  • Hammer frequency: 3900BPM(RPM); Impact Energy: 15J;
  • Max. Drill Capacity Dia.: 1-1/2''/38MM; Bit Type: 17mm (5/8 in.) Hex Shank Bits;
  • Package Included: 1 x 1-1/2'' Demolition Jack Hammer; 1 x Side Auxiliary Handle; 1 x Point Chisel 17x250mm (Hex Shank); 1 x Flat Chisel 17x250mm (Hex Shank); 1 x Key Wrench; 1 x Pair of Spare Carbon Brushes; 1 x Heavy Duty Plastic Storage Case; 1 x User's Manual.
Tortured Existence
  • excellent service
  • more than 30.500 articles
  • Perverted Taste Music GmbH
  • Audio CD – Audiobook
  • English (Publication Language)
Neiko 02845A Electric Demolition Jack Hammer with Point and Flat Chisel Bits
  • Powerful 11.3 Amp high performance motor delivers 1,800 impact beats per minute with 45 joules force to easily break through concrete, brick, ground and earth
  • Heavy duty all metal construction with industrial sand blasted powder coating finish for corrosion resistance and durability
  • Specially engineered helical gear system operates more smoothly and quietly than traditional spur gear, and more importantly, lasts longer and reduces premature wear out
  • 360 Degree swivel auxiliary handle with non-slip grip provides maximum control and support for user operation
  • Comes with a blow molded case with rolling wheels for easy and convenient transportation
  • Amazon Prime Video (Video on Demand)
  • Banzai Films (Producer)
  • English (Playback Language)
  • English (Subtitle)
XtremepowerUS Demolition Electric Hammer Jack Hammer Handle 1000W Concrete Breaker Flat and Point Chisel Bits with Case
  • ★ 1000-Watt Electric Demolition Concrete Breaker is engineered with a powerful 9 Amp motor that delivers up to 8 ft. lb. of torque power.
  • ★ Maximum impact rate of 3000 r/minute and 1000-watts of consistent power give you enough force to tackle the toughest of demolition projects.
  • ★ Secure-fit latched blow-molded storage case designed with handles to offer easy transportation and reliable housing for equipment.
  • ★ Robust electric concrete breaker constructed from highly durable materials to provide a forceful impact for maximum removal and continuous demolition.
  • ★ Included: The set includes a 5/8 in. hex bull point chisel , 5/8 in. flat chisel, tool wrench, and an extra set of carbon brushes.
Neiko 02627 Clay Spade Chisel Bit for Demolition Hammers, Alloy Steel | 1-1/8" Hex Shank | 17.5-inch Length
  • Scoop shovel chisel bit is great for digging large holes and garden, backyard landscaping
  • Heavy duty shovel bit has alloy steel construction to cut through tough surfaces and reduced wear
  • Demolition jackhammer shank scoop is 5-1/2" wide, rounded and 17-1/2" in length to work fast
  • Electric jack hammer bit for all demo / breaker hammers with 1-1/8 inch hex shank
  • Digs through concrete, packed soil, clay, gravel, adobe, sandstone, frozen dirt, and more
Demolition T-Shirt Jackhammer and Sledge Hammers
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem

Buyer Guide to Choose Demolition Hammers

There are many models of demolition hammers, so you should familiarize yourself with their characteristics before making a decision. You have to understand what these tools are and how they work if you want to buy one. Below, we answer a list of frequently asked questions that users looking for like a demolition hammer ask themselves so that you can make a good purchase.

What Is a Demolition Hammer?

A demolition hammer is a tool used to punch dense or resistant surfaces with great energy. It can exert very high levels of strength that allow you to break the object. This tool is frequently used on masonry materials such as concrete, stone, ceramic, and brick.

Demolition hammers are so strong that they can be used in very difficult jobs. They are normally used to split stone or masonry through the use of points capable of penetrating materials.

What Are the Main Uses of The Demolition Hammer?

Impact hammers are mainly used for masonry and construction works. They are used to drill, chisel, drill, and demolish. They are very powerful tools therefore used for work on rock, stone, concrete, masonry, brick, or asphalt. They come from bricklayers to break through and demolish walls.

Why Is It Advisable to Buy a Demolition Hammer?

Demolition hammers are very versatile and efficient tools. Through electro-pneumatic impacts, they hit the materials, which allows you to perform chiseling work. A demolition hammer is an ideal tool for professional work, useful for large diameter drilling. Below is a list of advantages and disadvantages:

  • Versatile
  • You can make large-diameter perforations
  • Possibility to drill without percussion
  • Chisel and demolish
  • It allows you to perform heavy and professional tasks
  • More expensive than the drill
  • Heavy
  • Noisy
  • Dangerous

What Types of Demolition Hammers Are There?

There are two basic models of demolition hammers: with cable and with battery. Let’s start with the cable hammers. These are the most common models, they must be connected to the power in order to function.

They are more powerful than the cordless models, but also heavier. You will not be able to work without electricity. Battery-powered demolition hammers are less performing. They are also usually more expensive.

They have a compact and ergonomic design, do not weigh as much but have less energy. Batteries are usually lithium-ion and allow you to move freely while you work. The bag limit is their power, which is important in these tools.

How Do You Use a Demolition Hammer?

To work with your demolition hammer you need to connect it to the electrical outlet. It’s a powerful tool, so you need to make sure you have a correct posture before turning it on. Make sure you keep control over the tool. Use the additional handle.

if it has one, and hold the hammer in front of you. The same if you work horizontally. Before turning it on, move the tip closer to the workplace and press a little to contain the vibrations. Turn on the switch on the rear handle and move the hammer to the best angle for faster demolition.

What Precautions Must Be Taken to Avoid Accidents?

As always, you should adhere to the protective precautions applicable in any job and with any power tool. However, demolition hammers are particularly dangerous, so let’s take a look at some specific safety rules for using this tool:

  1. Never use the demolition hammer without first checking the wiring of the area. If the tool hits a cable you may be electrocuted.
  2. Before drilling, make sure the tips or chisels are tight.
  3. Clear the work area. During the chiseling work, they can splash rock fragments that could hit someone and injure him.
  4. Always work with the power cord behind you. If you hit the cord, you can get an electric shock.
  5. Use safety clothing and equipment when doing demolition work.
  6. Use safety gloves to improve your grip.
  7. Wear boots and protective glasses. In addition, you will need a mask to avoid ingesting dust.
  8. Demolition hammers are very noisy tools, use insulating headphones to protect your hearing.
  9. You must wear a helmet when doing demolition work.

What Attention Does a Demolition Hammer Require?

Like any tool, demolition hammers also require certain attention. For example, the ‘lubricant change’ (usually supplied with the instrument) is part of ordinary maintenance, to be carried out quite frequently.

Also, when working, remember not to push or force the hammer too hard, because it could burn the engine. Make sure to use suitable drill bits for your hammer model. Tighten the bit well before activating the tool.

When working with an electric motor, you must prevent it from coming into direct contact with water. In addition, proper cleaning after each use is essential to avoid dust build-up. It is advisable to keep the tool in a cool, dry place away from moisture. If possible, always in its container or case.

Purchase Criterion

Below, we will analyze a number of factors that you should take into consideration before purchasing a demolition hammer. This way, you are more likely to be satisfied with what you bought. Nobody wants to regret their purchase after a few months. If you want to choose the best demolition hammer on the market, you must follow these criteria:

  • Percussion frequency
  • Brand
  • Rotation speed
  • With or without cable
  • Power
  • Design
  • Accessories

Percussion Frequency

The frequency of impacts expresses the number of strokes per minute that the tool transfers to the tip. This is a decisive feature in a demolition hammer. It is a very useful factor for those with a particular interest in percussion mode. The strokes per minute are expressed as IPM and translated into Joule force.

Impact energy is another main criterion. As we have told you, it is expressed in Joules (J). This energy determines the efficiency and performance of a demolition hammer. More joules, more power! Keep in mind that, for occasional use, about 3 joules will be sufficient. For professional use, 5J or more.


You can decide to buy a tool of a known brand or a demolition hammer of an unknown brand. Unfortunately, the quality of the tool is often directly related to the brand and also to the price. Our advice is, as far as possible, to choose a hammer of a reliable brand.

The best brands usually offer quality products. In addition, they have a much more efficient customer service. Likewise, it is important to make sure that the manufacturer offers the correct warranty options for, a minimum of two years. In this way, you will always be covered in case of unexpected events or breakdowns.

Rotation Speed

The speed of rotation is another of the important characteristic because it defines the ability of the demolition hammer to perforate a material. In the case of hammers, the rotation speed is lower than that of conventional drills. However, the ideal rotation speed for a demolition hammer is between 300 and 1000 RPM.

With or Without Cable

The use of battery-powered tools has spread considerably thanks to the elimination of cables and the limitations that these entail. With these tools, you forget the plugs and extensions. When choosing a cordless hammer, you need to make sure that the batteries are powerful and long-lasting. The charger and an additional battery must also be included.

If you choose a cable demolition hammer, it must be of an adequate length so as not to imply a limitation. It must also be a good quality cable, with a high level of resistance that guarantees its durability.


The power reflects the performance of a demolition hammer. More power equals greater working capacity on resistant materials. The number of watts of a standard hammer can vary from 500 W to 800 W.

However, if you are looking for a powerful and professional tool, you should opt for motors from 1500 W to 2000 W. This factor directly affects the price of the instrument. A higher power corresponds to a further professional tool, but also of higher cost. If you choose a medium power, you will have a hammer suitable for simple DIY projects


Whether it’s a corded or cordless tool, you should look for compact and ergonomic designs that are practical. When you can, choose those with rubber grip or covered with rubber, as they facilitate the grip. Many have anti-vibration systems which are important when doing long or heavy work.

Weight is another important factor. Look for light models so you can use them for work on high without exhausting your strength. Even the dimensions may vary between one model and another, it is advisable to choose a compact size that can be used in confined spaces. Make sure that changing the tips is quick and easy.


To fully exploit the capabilities of the demolition hammer, you need to have a set of drills and chisels. Not to mention other accessories that adapt to the type of activity you have to carry out at a given moment. Many models and brands include sturdy cases to store tools, tips, and accessories.

The basic models do not include these accessories. However, they can be purchased simply and inexpensively in any hardware store. You must know that there are different types of tips and chisels and that each accessory works on a specific type of material. Poor quality tips break easily if you use them you risk not finishing the job.

Like this article? Share with your friends!

Read also:

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed